The Magnetic Gate Minder provides safety with added efficiency of saving time when working with stock in yards, the Magnetic Gate Minder is designed to hold a swinging gate fully open, this overcomes the possibility of stock getting in behind the gate wasting time and effort, The magnet in this device is strong enough to hold most swinging gates back against the rails but it retains the ability to release the gate quickly, allowing you to get the gate close in a hurry.
This can lead to increased operator safety.
The Magnetic Gate Minder is east to install and will work in steel or timber yards.
When installing in timber yards a metal striker plate should be utilised, this is supplied in the timber attachment kit.
This item is proving to be a handy tool all around the farm, holding shed doors and paddock gates open.

Two hand cutter for cutting steel cables up to 12 mm (0.5 in.) in diameter.
Also recommended for cutting metal rods and spring steel wire. Optimum cutting yield thanks to the shape of the handles and special steel blades. A cutting tool capable of satisfying the most varied industrial requirements.
Hardened steel blades and centre bolt, unbreakable forged aluminium alloy handles with plastic covering for good grip.

Light and easily handled, it cuts easily through a hardened steel wire 4 mm (0.2 in.) in diameter, steel cable up to 9 mm (0.4 in.), and metal rods and spring steel wire.
Hardened steel blades and centre bolt, unbreakable forged aluminium alloy handles with plastic covering for good grip.

Small single-hand cutter, compact, light and very easy to handle.
Recommended for cutting hardened spring steel wire up to 2.5 mm (0.1 in.) and cables up to 7 mm (0.3 in.). Its quality and long life make it particularly suitable for manufacturing and repairs in all fields of industry and craft.
Because of the special shape of the blades, cables are not crushed, but cut progressively.
Hardened steel blades and centre bolt, pressed steel handles with plastic covering.

Compression handle, Super strong trace spring bounces

• The Wizard Wire Strainer is used to strain wire
• Grips wire securely
• Can be anchored around the strainer post
• The most efficient method for tensioning longer strains of plain and barbed wire
• Must be used in conjunction with the Wedgelock® Clamp for straining pre fabricated fencing such as StockSafe-T™, Stocklock®, Stocktite®, Hinged Joint and Netting 

 

NOTE: Extra long 3m chains are available and are sold separately. The additional length of the 3m chain over the standard 1.8m chain is usefull on longer strains or if tying off around a large diameter strainer post. Please quote OneSteel Material #142671 when ordering

 

Simple to use wire joiners made from Cast Alloy,
Simply push two wires in from each direction through the center hole,
bend both ends down and back and feed each wire into the outter hole! All ready to be strained!

Small will take wire up to 2.5mm
Large will take wire up to 3.5mm

To join two wires is simple as pushing the ends into the Gripple.
The moment any tension is applied in the opposite direction the Gripple locks solid. It’s that easy. And Gripples are re-tensionable and reusable.
Gripple's are used whenever wire needs to be joined and/or tensioned. Specifically designed for agricultural trellising and fencing.
Gripples are proving useful in hundreds of their applications.
Gripples are especially ideal for applications where you need to retension wire over many years.
That’s because Gripples do not require bending, twisting or crimping.
Quick and easy to use. The Gripple makes joining, splicing, tensioning and re-tensioning - farm fencing- wildlife fencing - barbed wire fencing - single stand high tensile fencing - vineyard and fruit trellising wires, faster and easier.
The Gripple wire joiner saves time and effort when joining wires, tensioning or terminating wire at a strainer post. Wires are simply pushed through the Gripple joiner in each direction and the one way grip means each wire is firmly held. Made with an alloy casing and stainless steel springs, Gripple wire joiners are exceptionally long lasting and can be re-used.

Medium Gripple
For Plain wire:
2.00mm Growire® Dripper Wire
2.50mm Tyeasy® HT Wire
2.50mm Flexabel® HT Wire
2.50mm Permelec® Electric Fence Wire
2.80mm High Tensile Wire
For Prefabricated Fencing:
High Tensile Wire
Stocktite®
Stocklock®
Hinged Joint

Large Gripple:
3.15mm and 4.00mm soft fence wire

The Gripple T-Clip eliminates the need for knotting – saves you time and labour when building a fence.
Quick and easy to install, the Gripple T-Clip is faster than conventional methods. The T-Clip can be used at either end of the fence line to tie off wire.
It replaces the need to bend, twist, stable or knot wire around a strainer post.
Ideal for use on pre-fabricated fence and plain wire. Recommended for use on round posts, The T-Clip can be adjusted on the wire prior to tensioning using the release tool.
Suitable Wire Products
all plain and/or prefabricated wire between 1.80mm – 3.25mmin diameter.
(Note: Netting is not compatible with the T-Clip)
Each

Great Low cost versitile fencing pliers.
Designed for wood and steel posts. Heavy duty construction, 
Great to grip rubberised handles.
Pulls staples
Splices wire
Cuts wire
Anything for repairing a fence.

Non-slip handles
Highest grade steel construction
Heavy duty wire cutters