A solid 3 litre with an easy to use handle.
Calf version is fitted with the Milk Bar Teat.
Lamb and Kid version is fitted with the Milk Bar lamb teat.

3 Litre Feed bottle for single calves
This tough 3 litre bottle with its great soft teat is ideal for feeding single calves
Graduations on side of bottle. Built in handle in bottle.

Now when you get a real fast sucker, switch to fast and let him go for it!
When you have a weak premature-born calf, needing careful feeding, switch to stop or slow and let him take milk as he can cope, without drowning.
The three speeds control the air-inlet to the bottle, and thus the milk outflow. Reduce time wasted on speedsters and prevent drowning of weaklings, all using  the same bottle and test.
Uses the Peach Teat.

How about this? Fill the bottle up with grain, pellets etc., and the claves feed through special teats just like milk! Keeps feed clean and dry. No birds, no flies, no waste. Spare teats available. Suckling action by very young calves produces a saliva to help digest the meal. Calves will start feeding from this from day 5, ensuring earlier rumen development. 2 litre capacity. Now 4 litre capacity! Requires low molasses meals and pellets which will flow freely. Complete with bracket mount.

Milk Teats are avalible to convert to a drink feeder.

** Milk teats are not supplied in the complete package
** Metal Bracket is not supplied in the complete package

The milk bar teat is designed to simulate the slow, natural suckling action that a calf needs for correct digestion.
The inverted tip prevents irritations in the calfs mouth, as there is no protrusion to rub against the roof of the calf's mouth.
Hygienic Milk Bar Teats have no threads or valve to harbor bacteria.
Milk Bar teats do not need to be removed for cleaning, so there is no time consuming re assembly required before the next use.
The controlled feeding rate of the Milk Bar Teat ensures correct curd formation in the abomasum, preventing raw milk entering the intestine.
Raw milk in the intestine is a leading cause of nutritional scours, or milk scours.
The correct suckling action with the Milk Bar Teat at the correct height will prevent milk entering the lung, thus helping prevent pneumonia.

No threads, grooves or sharp angles to harbor bacteria.
The Milk Bar range is extremely hygienic and easy to clean.
Fitted with the Milk Bar Teat for reduced scours, reduced pneumonia, and no cross sucking.
Made from 100% UV stabilized food approved polyethylene, the Milk Bar Range is extremely strong and durable and has a 2 year warranty on all plastic and metal parts.
The Milk Bar single compartment 1 teat feeder is the perfect feeder for your young in single pens.
Built in hooks fit 25mm rails.
Convenient hand grip.
Calf version fitted with the Milk Bar calf teats.
Lamb/Kid Version fitted with Milk Bar lamb teats.
Holds 3 litres.

The Milk Bar 5 teat feeder is a single compatment feeder.
No threads, grooves or sharp angles to harbor bacteria.
The Milk Bar range is extremely hygienic and easy to clean.
Fitted with the Milk Bar Teat for reduced scours, reduced pneumonia, and no cross sucking.
Made from 100% UV stabilized food approved polyethylene, the Milk Bar Range is extremely strong and durable and has a 2 year warranty on all plastic and metal parts.
Holds 15 litres to feed 5 animals at a time.
Sturdy carry handle and with built in hooks to fit 25mm or 40 mm rails.
Gradients marked in 5 litre increments.
Calf version is fitted with the Milk Bar calf teats.
Lamb and Kid version is fitted with Milk Bar lamb teats.
Holds 15 litres.

No threads, grooves or sharp angles to harbor bacteria.
The Milk Bar range is extremely hygienic and easy to clean.
Fitted with the Milk Bar Teat for reduced scours, reduced pneumonia, and no cross sucking. Made from 100% UV stabilized food approved polyethylene, the Milk Bar Range is extremely strong and durable
Each compartment holds 2.5 litres.
Fitted with Ezi Lock hooks that will fit allow you to hang the feeder on any rail size from wire up through to 75mm, and lock in place.
500mm long x 250mm wide x 400mm high.
Calf version is fitted with the Milk Bar calf teats.
Lamb and Kid version is fitted with Milk Bar lamb teats.
Weighs 3kg.

No threads, grooves or sharp angles to harbor bacteria.
The Milk Bar range is extremely hygienic and easy to clean.
Fitted with the Milk Bar Teats for reduced scours, reduced pneumonia, and no cross sucking.
Made from 100% UV stabilized food approved polyethylene, the Milk Bar Range is extremely strong and durable
Each compartment holds 2.5 litres.
Fitted with Ezi Lock hooks that will fit allow you to hang the feeder on any rail size from wire up through to 75mm, and lock in place.
830mm long x 290mm wide x 370mm high.
Weighs 4.5kg.
Calf version fitted with the Milk Bar calf teats.
Lamb and Kid version fitted with Milk Bar Lamb teats

Multi purpose trough feeder, ideal for calves, pigs, goats, alpaca or dogs.
Holds 6 to 8kg of meal or 15 litres of liquid.
650mm long x 200mm wide x 130mm deep.
Moulded hooks fit 25mm rails

Designed especially as a show feeder.
Slim rail hooks designed to fit between the vertical bars of show stalls.
These buckets stack well for storage and transport.
Hooks are 60cm deep.
A carry handle is built in, and the dimensions of the feeder are about 29cm wide, 29cm deep, and 24cm high. Green in colour, not red as shown.

Made from heavy duty plastic material, this rail mounted feed bucket also features a built in carrying handle.
The mounting hooks are 57mm wide and will fit over a standard 2 inch rough hewn timber rail.
This 13 litre capacity bucket may also be ideal for taking to the shows and field days.

This heavy duty UV stabilised plastic feeder features 4 moulded hooks and does not have any sharp edges.
Easy to clean. Use it for your cattle, horses, alpacas, goats etc.
A well proven product from Europe's largest manufacturer of domestic animal plastic products.
Width 44cm, Depth 33cm, Height 32cm
Capacity 30 litre with graduations inside.

Now here is a great idea!
A sturdy rigid feed/water bowl, designed to fit in a standard car tyre.
A great way to stop the feed and water ending up all over the ground.
Easy to remove for cleaning.

Made from re-cycled heavy black rubber to help prevent injuries to your livestock.
Suitable for goat, alpaca and other smaller animals.
Authentic Stock Safe brand.

An excellent stall or pen feeder with fittings to make it a wall mounted corner feeder.
Made from re-cycled heavy black rubber to help prevent injuries to your livestock.
Suitable for cattle, horse, goat, alpaca etc.
45cm diameter x 21cm high.
Made to last Stock Safe brand.

Rectangular feeder on strong steel brackets which can be hung over the fence or door.
Made from re-cycled heavy black rubber to help prevent injuries to your livestock.
Suitable for cattle, horse, goat, alpaca etc.
High performing Stock Safe brand.

Same as our other 5L single teat calf feeder but with hooks on the back to hook over fence rails. Made from UV stable polypropylene with rounded corners for easy cleaning. Easily stackable for storage.

This two teat calf feeder is modular and can stack together with the teats on.
You can also join them together with the dovetail at the ends.
A built in handle in the middle allows you to easily carry the feeder down the paddock full, and hang it on the fence.
Comes standard with the Excal Big Softy teats.
Ten litres total in capacity with two compartments of four litres.
The hooks on the back are suitable for both timber and pipe rails.
Overall length is 42cm.

The Big Softy gravity feed calf teat.
The tip design does not leak even after substatial use, but still allows the calf to suckle freely.
This teat will fit all feeders with the standard 20 - 22mm teat holes.
It is especially suitable for hand held bottle feeders.